Behringer TD-3-RD Analog Bass Line Synthesizer with 16-Step Sequencer - Red
TD-3-RD
Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-RD lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-RD is sure to become one of your favorite synthesizers.
Pure Analog Signal Path
Great care has been taken in engineering the TD-3-RD, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-RD its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects – all the way out to the otherworldly sounds of your imagination.
Rock Right Out of the Box!
Your TD-3-RD comes ready to rock, thanks to its default signal routing that doesn’t require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and ’90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history – or to design incredibly fat and original sounds that will make you a legend in your own right!
Versatile VCF
The very heart of TD-3-RD’s sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.
Vintage Oscillator
TD-3-RD’s authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.
Onboard Sequencer
The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern.
Kick it Into Distortion!
We saved one of the most exciting features for the last stage in the all-analog signal path – Distortion! When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the “envelope” to the max. The crowd won’t know what hit ‘em!
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Behringer TD-3-RD Analog Bass Line Synthesizer with 16-Step Sequencer - Red
Behringer TD-3-RD Analog Bass Line Synthesizer with 16-Step Sequencer - Red
TD-3-RD
Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-RD lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-RD is sure to become one of your favorite synthesizers.
Pure Analog Signal Path
Great care has been taken in engineering the TD-3-RD, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-RD its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects – all the way out to the otherworldly sounds of your imagination.
Rock Right Out of the Box!
Your TD-3-RD comes ready to rock, thanks to its default signal routing that doesn’t require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and ’90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history – or to design incredibly fat and original sounds that will make you a legend in your own right!
Versatile VCF
The very heart of TD-3-RD’s sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.
Vintage Oscillator
TD-3-RD’s authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.
Onboard Sequencer
The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern.
Kick it Into Distortion!
We saved one of the most exciting features for the last stage in the all-analog signal path – Distortion! When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the “envelope” to the max. The crowd won’t know what hit ‘em!
Original: $149.00
-65%$149.00
$52.15Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
TD-3-RD
Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-RD lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-RD is sure to become one of your favorite synthesizers.
Pure Analog Signal Path
Great care has been taken in engineering the TD-3-RD, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-RD its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects – all the way out to the otherworldly sounds of your imagination.
Rock Right Out of the Box!
Your TD-3-RD comes ready to rock, thanks to its default signal routing that doesn’t require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and ’90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history – or to design incredibly fat and original sounds that will make you a legend in your own right!
Versatile VCF
The very heart of TD-3-RD’s sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.
Vintage Oscillator
TD-3-RD’s authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.
Onboard Sequencer
The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern.
Kick it Into Distortion!
We saved one of the most exciting features for the last stage in the all-analog signal path – Distortion! When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the “envelope” to the max. The crowd won’t know what hit ‘em!
