Solid State Logic Native X-Phase
X-Phase is an All-pass Filter plug-in that offers the user manual control and high quality response. It enables the user to apply a phase shift (sometimes called a phase offset) at a specified frequency within a signal. Unlike other filter types where the gain of selected frequencies is altered, with an All-pass Filter the gain remains unchanged throughout the signal. This is useful for fixing phase problems with microphones when recording: e.g. overheads causing phase problems when mixed with close mic's.
X-Phase can also be used to create a comb filter by applying a filtered signal to an unfiltered version of the same signal. With X-Phase the controls are simple: a Frequency control selects the desired frequency where a phase offset needs to be applied, a Q control sets the slope of the curve of correction to be applied across the signal and a phase invert button enables the phase of the filter to be flipped 180 degrees.
A separate Delay section is applied to the entire signal for broader time alignment of the signal. The Delay controls consist of a delay control which can be set to display and adjust in seconds, milliseconds, samples, metres or feet and a set of buttons for fine-tuning.
The overall plug-in can be set to adjust either L, R or both L&R. X-Phase can be automated via standard DAW Automation data and has A&B Preset 'slots' with an A/B switch for easy comparison of two different combinations of settings. There are Input and Output Meters with Input and Output Level controls.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Solid State Logic Native X-Phase
Solid State Logic Native X-Phase
X-Phase is an All-pass Filter plug-in that offers the user manual control and high quality response. It enables the user to apply a phase shift (sometimes called a phase offset) at a specified frequency within a signal. Unlike other filter types where the gain of selected frequencies is altered, with an All-pass Filter the gain remains unchanged throughout the signal. This is useful for fixing phase problems with microphones when recording: e.g. overheads causing phase problems when mixed with close mic's.
X-Phase can also be used to create a comb filter by applying a filtered signal to an unfiltered version of the same signal. With X-Phase the controls are simple: a Frequency control selects the desired frequency where a phase offset needs to be applied, a Q control sets the slope of the curve of correction to be applied across the signal and a phase invert button enables the phase of the filter to be flipped 180 degrees.
A separate Delay section is applied to the entire signal for broader time alignment of the signal. The Delay controls consist of a delay control which can be set to display and adjust in seconds, milliseconds, samples, metres or feet and a set of buttons for fine-tuning.
The overall plug-in can be set to adjust either L, R or both L&R. X-Phase can be automated via standard DAW Automation data and has A&B Preset 'slots' with an A/B switch for easy comparison of two different combinations of settings. There are Input and Output Meters with Input and Output Level controls.
Original: $159.99
-65%$159.99
$56.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
X-Phase is an All-pass Filter plug-in that offers the user manual control and high quality response. It enables the user to apply a phase shift (sometimes called a phase offset) at a specified frequency within a signal. Unlike other filter types where the gain of selected frequencies is altered, with an All-pass Filter the gain remains unchanged throughout the signal. This is useful for fixing phase problems with microphones when recording: e.g. overheads causing phase problems when mixed with close mic's.
X-Phase can also be used to create a comb filter by applying a filtered signal to an unfiltered version of the same signal. With X-Phase the controls are simple: a Frequency control selects the desired frequency where a phase offset needs to be applied, a Q control sets the slope of the curve of correction to be applied across the signal and a phase invert button enables the phase of the filter to be flipped 180 degrees.
A separate Delay section is applied to the entire signal for broader time alignment of the signal. The Delay controls consist of a delay control which can be set to display and adjust in seconds, milliseconds, samples, metres or feet and a set of buttons for fine-tuning.
The overall plug-in can be set to adjust either L, R or both L&R. X-Phase can be automated via standard DAW Automation data and has A&B Preset 'slots' with an A/B switch for easy comparison of two different combinations of settings. There are Input and Output Meters with Input and Output Level controls.
